Release Notes for ZentriOS-WL-1.0
ZentriOS-WL-1.0 is the first release of ZentriOS-WL (Wi-Fi Lite). This edition supports the AMW007 Spectre.
ZentriOS-WL-1.0 contains a restricted set of the commands and variables available with ZentriOS-W and ZentriOS-WZ.
Known Issues (v1.0.0)
Last Updated : August, 2016
No known issues.
Known Issues (v1.0.1)
Beta release only.
Last Updated: November 2016
| Description | Solution or Workaround |
|---|---|
| Concurrent WLAN + softAP mode is not supported in WL. | Before bringing up the softAP, make sure the WLAN interface is down. Before bringing up the WLAN, ensure the softAP interface is down. |
Fixes and Improvements
| Topic | Description |
|---|---|
| Baud Rates | All baud rates documented in uart.baud are now supported, including raw baud rate mode. |
| Broadcast Data | Fixed a problem where assignments to broadcast.data caused an exception |
| Fixed a problem where a hardfault occurred when RSSI was included in broadcast.data | |
| TCP Server | Fixed a problem where the the TCP server failed to send data back to a connected client. |
| UDP Client Port | Fixed a problem where passing a local port to the udp_client had no effect |
Known Issues (v1.0.2)
Last Updated: December 2016
| Description | Solution or Workaround |
|---|---|
| Concurrent WLAN + softAP mode is not supported in WL. | Before bringing up the softAP, make sure the WLAN interface is down. Before bringing up the WLAN, ensure the softAP interface is down. |
Fixes and Improvements
| Topic | Description |
|---|---|
| Remote terminal | Fixed a problem where remote terminal did not work with the Soft AP interface |
| stream_read | Fixed a problem where extra carriage return (0x0D) characters were added to a stream. |
| TCP connection stream mode | Fixed a problem where opening a TCP connection via Soft AP, then closing it in stream mode, resulted in a hard fault. |