mDNS Device Discovery
This example demonstrates how to find the module on the network using a network discovery protocol such as mDNS, LLMNR or Netbios (WiConnect includes support for all of these protocols). Network discovery enables you to connect with the module using a known domain, rather than a dynamically allocated IP address.
This example demonstrates how to:
- Set up the module to connect to your local network
- Start the WiConnect mDNS service
- Connect to the module via its mDNS domain
- Advertise an mDNS service
To run this example follow these steps:
Connect Your Module to the Local Network
To configure mDNS, use a WiConnect terminal - see Getting Started. Once you have a terminal connected, issue the following WiConnect command to configure the credentials for the local network:
Enable the mDNS Daemon
Enable mDNS and specify the domain advertised by the module using the following commands:
set mdns.enabled 1 set mdns.name mymodule
Save the mDNS configuration, then restart the network:
save network_down network_up
The module automatically starts the network discovery service after connecting to the network.
The response from WiConnect is similar to the following:
WiConnect-2.1.0.x, Built:2015-01-14 21:34:43 for AMW004.3, Board:AMW004-E03.3 [Ready] [Associating to mynetwork] > Obtaining IPv4 address via DHCP IPv4 address: 10.5.6.59 Starting mDNS mDNS domain: mymodule.local [Associated]
Ping the Module using the mDNS Domain
From a command line on a Mac or Windows PC connected to the same local network, send an ICMP ping to the module.
C:\> ping mymodule.local Pinging mymodule.local [10.5.6.59] with 32 bytes of data: Reply from 10.5.6.59: bytes=32 time=308ms TTL=128 Reply from 10.5.6.59: bytes=32 time=8ms TTL=128 Reply from 10.5.6.59: bytes=32 time=4ms TTL=128 Reply from 10.5.6.59: bytes=32 time=96ms TTL=128
NOTE: Some ISPs hijack the
.local domain which confuses Microsoft Windows, so it may be necessary to omit
.local from the name on Windows platforms.
If there is no response (on a Windows PC), try sending the ping directly to the module name instead.
C:\> ping mymodule Pinging mymodule [10.5.6.59] with 32 bytes of data: Reply from 10.5.6.59: bytes=32 time=33ms TTL=128 Reply from 10.5.6.59: bytes=32 time=17ms TTL=128 Reply from 10.5.6.59: bytes=32 time=5ms TTL=128 Reply from 10.5.6.59: bytes=32 time=29ms TTL=128
Advertise an mDNS Service
This example assumes the network credentials are set up as described in Connect Your Module to the Local Network.
To advertise an mDNS service, you need to start a WiConnect server. This example uses the HTTP server. To enable the HTTP server, issue the WiConnect commands:
set http.server.enabled 1 set http.server.api_enabled 1
Advertise the service using the mdns.service variable:
> set md s http "Test Server" "record1=on.record2=off.another=21"
The server name and TXT record name=value pairs are arbitrary in this case. For specific applications, there may be a required naming convention and format for the TXT record information.
Restart the network to begin advertising:
The response is similar to the following:
[Associating to ackme] In progress > Obtaining IPv4 address via DHCP IPv4 address: 10.5.6.82 Starting mDNS mDNS domain: mymodule.local Adding mDNS service: Test Server._http._tcp.local HTTP and REST API server listening on port: 80 [Associated]
Note the line
Adding mDNS service: Test Server._http._tcp.local.
This means a device capable of browsing for mDNS services will be able to discover your "Test Server" service in the
.local domain, among the
_http._tcp. services, and read its name and TXT record for additional information.
If you have a Bonjour browser app you can view the module's advertised services.
To disable advertising of the service, set the server's name to
set md s http -1
Now bring the network down and back up:
The response is similar to the following:
[2015-01-29 | 06:44:48: Associating to ackme] In progress > Obtaining IPv4 address via DHCP IPv4 address: 10.5.6.82 Starting mDNS mDNS domain: nealemodule.local HTTP and REST API server listening on port: 80 [2015-01-29 | 06:44:51: Associated]
Note that the
Adding mDNS service line no longer appears.
If you have a Bonjour browser app you can see that the module service is no longer advertised.