Zentri AMW004-E03 Mackerel
The AMW004-E03 Mackerel evaluation board is based on the AMW004 Wallaby module.
Product details and Purchasing Information
Peripherals and Pins
ZentriOS Edition Support
The AMW004 platform supports:
- ZentriOS-W - Command API
- ZentriOS-WZ - Command API, ZAPs and SDK
ZentriOS Documentation References
ZentriOS SDK
The ZentriOS SDK supports the AMW004 platform.
SDK example apps are tested for version AMW004-E03.5.
- Unlocking the AMW004 JTAG Interface - a special procedure is required to unlock the AMW004 for use with the SDK
- SDK Example Applications
See also AMW004 module, ZentriOS SDK.
Connecting the AMW004 for Use with the ZentriOS SDK
The SDK controls the ZentriOS device via a Zentri ATG002 Piranha Debug Tool.
If you are using a Zentri evaluation board with an AMW004 module, you need to unlock it with a special procedure. See Unlocking the AMW004 JTAG Interface.
Connect the 10-way ribbon cable between the Piranha board and the Zentri device. Connect a good quality USB cable between a USB port on the SDK computer and the Piranha USB port.
After connecting the AMW004 device, you can proceed with running the ZentriOS SDK Setup Device wizard. See SDK, Getting Started, Device Setup.
SDK Memory Size and Availability
| Section | Memory Size | Available Size | Comments |
|---|---|---|---|
| Image | 1Mbyte | ~200K | While the extended serial flash is 1M, other files reside on it so the actual Zap image is smaller. |
| Code | 128K | ~30K | The RAM is 128K but network buffers, ZentriOS and Zap structures and additional features use this memory as well. |
| Data | 128K | ~10K | See comment above. Code and Data sections use the same memory for this platform. |
See ZAP Memory Sections.